Introduction

DisplayPort 1.2a Extender Kit Ideal for Digital Signage in Schools and Offices
This complete transmitter and transceiver system is recommended for video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings, hotels and other digital signage applications where the source and display are farther apart than conventional A/V cables allow. The B127A-111-BDTD extends 4K signals from a DisplayPort source device to a DisplayPort monitor up to 230 feet (70.1 meters) away with zero latency via user-supplied Cat6 cabling.

Transmits Crystal-Clear 4K Video with 4:4:4 Color
The B127A-111-BDTD supports Ultra HD resolutions up to 3840 x 2160 (4K x 2K) at 30 Hz with 7.1-channel surround sound via the transceiver’s TOSLINK audio output. HDCP 2.2 compliance allows you to stream 4K Amazon and Netflix content with no complications. This extender kit also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor. Built-in equalization allows you to fine-tune the image quality at the remote display.

Local HDMI Port on Transmitter Supports 4K @ 30 Hz Resolution
To monitor the video signal being extended to the transceiver, connect a 4K display to the transmitter’s local HDMI port with a user-supplied HDMI cable.

Built-In PoC Technology Provides Transceiver Power to Avoid Bulky External Power Bricks
Power over Cable (PoC) technology powers either the transmitter or transceiver over Cat6 cable. Connect the included power supply at either end to power the entire installation. LEDs on both the transmitter and transceiver will light up to indicate the system is receiving power and a signal is being transmitted. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the transceiver where needed without worrying about finding a nearby AC outlet.

Create a Daisy Chain to Achieve Even More Distance
This extender kit is capable of forming daisy-chain installations up to 920 feet (280.4 meters) from the transmitter by connecting additional B127A-110-BD transceivers (sold separately). Up to four total transceivers can be chained together, each capable of extending a 4K/30 Hz signal up to 230 feet per unit. The kit is also compatible with Tripp Lite's B127A-010-H signal booster (sold separately), which allows the signal, when used in a daisy chain, to be enhanced up to 1,090 feet (332.2 meters) total. Note
: B127A-010-H will only work when used in the first link of the daisy-chain installation.

Plug-and-Play Operation for Quick Setup and Immediate Use
The included transmitter and transceiver units work right out of the box with no software required. Mounting hardware is included for installing the transceiver on a wall, pole or 19-inch rack. Connect the transmitter to the source with a user-supplied DisplayPort cable (such as Tripp Lite’s P580-Series). Then, connect the transceiver to the display with another user-supplied DisplayPort cable. Finally, connect the two units with user-supplied Cat6 patch cable (such as Tripp Lite N202-Series cable).

TAA-Compliant for GSA Schedule Purchases
The B127A-111-BDTD is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Features

Type

AV transmitter & transceiver

Maximum resolution

3840 x 2160 pixels

Cable types supported

Cat5, Cat5e, Cat6, HDMI

Maximum transfer distance

70.1 m

Audio system

Multichannel

Extended display identification data (EDID)

Y

Audio output channels

7.1 channels

LED indicators

Y

Supported video modes

480i, 480p, 720p, 1080i, 1080p, 2160p

Supported graphics resolutions

1280 x 720 (HD 720), 1920 x 1080 (HD 1080), 3840 x 2160

Cable length

1.38 m

HDCP

Y

Material

Metal

Colour depth

36 bit

3D

Y

Rack mounting

Y

Consumer Electronics Control (CEC) support

Y

HDCP version

1.4/2.2

Product colour

Black

Ports & interfaces

Connectivity technology

Wired

Ethernet LAN

Y

RJ-45 input ports

1

RJ-45 output ports

2

HDMI in

1

DisplayPorts in

1

DisplayPorts out

1

Digital audio optical out

1

DC-in jack

Y

Power

AC input voltage

100 - 240 V

AC input frequency

50 - 60 Hz

Operating voltage

24 V

Input current

0.6 A

Output current

1 A

External power adapter

Y

Operational conditions

Operating temperature (T-T)

0 - 40 °C

Storage temperature (T-T)

-15 - 50 °C

Operating relative humidity (H-H)

0 - 85%

Storage relative humidity (H-H)

0 - 85%

Weight & dimensions

Receiver dimensions (WxDxH)

115 x 62.4 x 27 mm

Receiver weight

450 g

Transmitter dimensions (WxDxH)

115 x 62.4 x 27 mm

Transmitter weight

450 g

Packaging data

Quantity per pack

1 pc(s)

Package width

260.1 mm

Package depth

164.1 mm

Package height

55.1 mm

Package weight

560 g

Package type

Box

Packaging content

AC adapter included

Y

Included power plug types

AU, EU, NA, UK

Manual

Y

Mounting kit

Y

Technical details

Country of origin

Taiwan

Sustainability compliance

Y

Sustainability certificates

CE, REACH, RoHS

Logistics data

Master (outer) case width

573 mm

Master (outer) case length

273 mm

Master (outer) case height

175 mm

Master (outer) case gross weight

5.9 kg

Products per master (outer) case

10 pc(s)

Master (outer) case GTIN (EAN/UPC)

10037332263961