Introduction

APC MGE Galaxy 3500, 24 kW / 30 kVA,Input 400V 3PH / Output 400V, Extended runtime model.

Includes: Battery modules ship installed, Bolt down brackets, CD with software, Installation guide, Network Management Card, Power modules ship installed, Smart UPS signalling RS-232 cable, Start-Up Service, User Manual.

- Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
- Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.
- Parallel-redundant capable
Power the connected equipment with multiple UPSs to increase system redundancy

Availability
- Dual mains input
Increases availability by allowing the UPS to be connected to two separate power sources.
- Hot-swappable batteries
Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Parallel-capacity capable
Increases total power capacity by using multiple UPSs simultaneously.
- Advanced electrical features
Excellent power conditioning, very low harmonic distortion through IGBT rectifier, input power factor correction, and high efficiency
- Frequency and voltage regulation
Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
- Automatic internal bypass
Supplies utility power to the connected loads in the event of a UPS overload condition or fault.
- Generator compatible
Ensures clean, uninterrupted power to protected equipment when generator power is used.

Manageability
- Built-in Web/SNMP management
Full-featured management via a Web browser as well as comprehensive management from a Network Management System.
- Environmental Monitoring
Prevent equipment failure from a full range of threatening environmental conditions.
- LCD graphics display
Text and mimic diagrams that display modes of operation, system parameters and alarms.
- Audible alarms
Provides notification of changing utility power and UPS conditions.

Features

Output power capacity

30 kVA

Output power

24000 W

Input frequency

40/70 Hz

Maximum current

43 A

Emergency Power Off (EPO)

Y

Noise level

55 dB

Battery

Battery technology

Sealed Lead Acid (VRLA)

Battery recharge time

5 h

Replacement battery cartridge

4

Design

Product colour

Black

Certification

CE,EN 50091-2,EN/IEC 62040-3,EN/IEC 62040-1-1,IEC 61000-3-2,IEC 61000-3-3,ISO 14001,ISO 9001,VFI-SS-111

Operational conditions

Operating temperature (T-T)

0 - 40 °C

Storage temperature (T-T)

-15 - 45 °C

Operating relative humidity (H-H)

0 - 95%

Storage relative humidity (H-H)

0 - 95%

Operating altitude

0 - 999.9 m

Non-operating altitude

0 - 15000 m

Weight & dimensions

Weight

662 kg

Package weight

692 kg

Other features

Battery type

VRLA

Output connections

1 x 4-wire (3PH + G) 1 x 5-wire (3PH + N + G) 1 x Screw Terminals

Input connection type

5-wire (3PH + N + G)

Dimensions (WxDxH)

523 x 838 x 1491 mm

Output voltage note

+/-1%, +/- 5%

Package dimensions (WxDxH)

650 x 1062 x 1643 mm